SYNERGY BANDIT

SHELL CONSTRUCTION

We use our M10T fabrics for the inner shell and our MRS20 fabrics for the outer shell of our SYNERGY BANDIT Quilts. M10T is used for our inner shells because of its superior finish and satin feel. MRS20 provides an excellent compromise between ultralight weight, durability, and DWR finish without sacrificing breath-ability. Both M10T and MRS20 fabrics have been given exceptional ratings in independent testing by the International Down and Feather Laboratory (IDFL).

The chambers on the torso section of the SYNERGY BANDIT Quilts run vertically (top to bottom), providing exceptional drape, which means that the quilt will lie close to your body, resulting in better thermal performance. Gaps between your body and the inside of the quilt are hard for your body to heat; the efficient draping of the SYNERGY BANDIT eliminates almost all of this dead air. The chamber design of the SYNERGY BANDIT‘s foot box allows for a variety of options with a snug, efficient fit.

Each chamber is constructed using Ultralight Nano-mesh baffles between the chambers to allow for maximum loft. This also enables thermal convection between the chambers. The vertical design of the torso chambers allows for heat transfer between your core and extremities. The size of the inner chambers varies from 4-5″, resulting in less shifting than other larger-chambered designs.

The location of each Nano-mesh baffle is integral to the function of the quilt. Using advanced design and construction, the insulation is concentrated in those areas that need it most. This functional approach results in a quilt with maximum warmth for minimum weight.

NECK CLOSURE

The double snap and draw cord neck closure lets you fine-tune draft control, you have the option to adjust the draw cord from either end or in the center on all quilts. Add the optional Neck Line Draft Collar (available at an additional cost) to provide an even more effective seal in colder weather.

FOOT BOX OPTIONS

The SYNERGY BANDIT Quilt offers three foot box styles: Zipper w/Draw; Boxed Flat Sewn; or Insulated.

Zipper: For maximum versatility, choose the Zipper w/Draw option, which allows you the choice of laying the quilt out fully open, creating a partially-closed foot box for ventilation, or fully closing the foot box for colder weather use. This option is available at no additional cost.

Boxed: For simplicity and additional warmth – at the sacrifice of versatility – choose the Boxed Flat Sewn option. This style does not have the zipper or draw-cord of the previous option; rather the foot box is simply sewn shut then shaped into a “Box”. This option will reduce the weight of the finished product by approximately 0.25oz, and is an add-on at additional cost.

Insulated: The Insulated Foot Box provides a full and continuous insulation envelope for your feet, making for some very HAPPY TOES!!! This style provides the ultimate in warmth for cold weather quilts. This option will increase the weight of the finished product by approximately 1.25oz, and is an add-on at additional cost.

TAPER OPTIONS

No-Taper: When fully opened and lying flat, this shape forms a rectangle, with the head and foot ends being equal. The advantage of this style is that it provides maximum coverage and maximum foot box space.

Dynamic Tension Control System (DTCS)

The DTCS is a set of two adjustable elastic webbing running lengthwise along the left and right edges of the quilt in the torso. This elastic webbing is completely concealed in the edge detail of the quilt for a clean appearance and comfortable sleeping experience.

On colder nights you can tension the elastic webbing to compress the edges of the quilt and draw them under you, this has the effect of the quilt giving you a gentle hug and helping to seal out the cold night air. When used in conjunction with the pad strap system it also provides for a better seal between the quilt and your sleeping pad. When used in a hammock the DTCS will help keep the sides of the quilt tucked and drafts out. During warmer weather conditions you can completely loosen the elastics to allow you to use the quilt as a down blanket.

This option is available at an additional cost.

WGT: 0.5oz (14g)

ULTRALIGHT FABRICS

M10T is our ultralight 10-denier breathable, calendared DOWNPROOF taffeta nylon.  Our M10T was developed to be a great all-around UL fabric that offers excellent wind/water resistance, has an incredibly soft hand feel, and is highly down proof (both in lab tests and in field use) all at a great price point.  It has a finished weight of only 0.66 oz/yd2, making it one of the thinnest/lightest taffeta nylon fabrics on the market. M10T has a Durable Water Repellant (DWR) finish applied to the face side of the fabric, protecting you and your down from environmental moisture. M10T has received a 5 out of 5 score on the International Rotating Box Down proof Test (a score of 3 is considered average). M10T is best suited for the inner shell of a quilt and the outer shell of a quilt for those looking for the lightest possible quilt but at the sacrifice of some durability.

MRS20 is our ultralight 20-denier breathable mirco-ripstopped, calendared DOWNPROOF nylon. It has a 20-denier nylon thread woven into a micro-ripstop pattern, resulting in an exceptionally strong fabric with a finish weight of only 1.1oz/yd2. MRS20 has a Durable Water Repellant (DWR) finish applied to the face side of the fabric, protecting you and your insulation from environmental moisture. MRS20 retains a high level of breathability, allowing moisture from your body to pass through the quilt, preventing excessive condensation inside the down chamber. MRS20 has excellent color depth, giving your quilt a rich, luxurious look and feel. MRS20 has the softest feel of all our 20-denier shell fabrics. MRS20 is an excellent combination of weight, durability, and value. MRS20 has received a 5 out of 5 score on the International Rotating Box Down proof Test (a score of 3 is considered average).

SYNERGY INSULATION

While there is still no insulation that can mimic down’s unique characteristics, developments in synthetic insulations have become increasingly important for specialized uses and needs in outerwear – both fashion and technical. Synthetics are, by nature, water resistant and have a durability that can allow them to be used in particular placements and for situations you would not want to use down.

SYNERGY insulation features a unique synthetic cluster built around the finest water resistant fibers of varying deniers and composition to mimic the natural down cluster better than any existing blowable synthetic on the market. By using deniers ranging in size – some smaller than one denier – the SYNERGY cluster is able to bind to each other better to provide more warmth and greater durability. Much like down, SYNERGY works by trapping air providing maximum insulation for a given weight.

WARMTH – SYNERGY has tested to be warmer than a 600 fill power Goose Down when tested for warmth based on equal volume. While no synthetic can equal the warmth to weight, compressibility and resiliency of down, SYNERGY makes up for it with sheer durability and water resistance.

LOFT – In independent testing, SYNERGY has shown to have a loft equal to 625 Fill Power, with warmth closer to a 700 fill-power goose down. It is twice as warm as the nearest competitor.

DURABILITY – A synthetic insulation is only as good as its durability. Having been tested under harsh washing condition, SYNERGY is able to withstand 20+ repeated washings showing no discernible cold spots or clumping in baffles up to 3″ x 10″.

With the warmth closer to a 700 fill power down and able to be used in larger cold weather products, this new blowable insulation is one that finally transcends the small, lightweight jacket baffles common seen in comparable insulation.

PAD ATTACHMENT SYSTEM

The SYNERGY BANDIT is available with three possible options for use on a ground pad.

NONE PROVIDED

No connections provided, best for hammock use or very experienced quilt user to reduce drafting. This provides the lightest possible quilt but at the risk of increased drafting.

ULTRALIGHT

System includes three sets of loops along each side of the quilt and a single strap using 3/32” shock cord and toggles for connection. This provides a functional connection at the lowest possible weight.

This option is available at an additional cost.

Single strap wgt: 0.4oz /11g

DELUXE

System includes three sets of wafer clips along each side of the quilt, a single continuous 1/2” elastic strap loop with wafer clip connections, and a single 1/2″ elastic flat strap. If your quilt is wide enough to fully encircle you the wafer clips on the quilt can be fastened together to close the back of the quilt. Or the wafer clips on the quilt can be fastened to the continuous loop ½” elastic strap placed around your pad and the 1/2″ elastic flat strap placed under the user to provide an effective functional connection.

We recommend the 1/2″ continuous strap loop be attached to the center set of wafer clips on the quilt and the 1/2″ flat strap be placed on the bottom set of wafer clips on the quilt for best results.

This option is available at an additional cost.

WGT: 0.5oz/14g

INCLUDED ACCESSORIES

All SYNERGY BANDIT Quilts include a 40d Silpoly Stuff Sack